Carbon
hugger for K1300R & S
These Ilmberger-made huggers protect the rear shock absorber unit, silencer, collector, rear sub frame and lower legs/feet of the passenger. The rear shock is especially well protected against premature wear. A must for any owner who loves and wants to and
protect his/her BMW (and the passenger).
The hugger is fastened to the swing arm via a curved metal bracket that is bonded directly to the carbon fibre hugger body. This elegant solution shows again that when it comes to carbon fibre applications Ilmberger has the design and quality to produce a very practical but good looking part.
Easy to fit, sold with all fittings needed.
K1300R & S with or without ESA - £267.90
These Ilmberger-made huggers protect the rear shock absorber unit, silencer, collector, rear sub frame and lower legs/feet of the passenger. The rear shock is especially well protected against premature wear. A must for any owner who loves and wants to and protect his/her BMW (and the passenger).
The hugger is fastened to the swing arm via a curved metal bracket that is bonded directly to the carbon fibre hugger body. This elegant solution shows again that when it comes to carbon fibre applications Ilmberger has the design and quality to produce a very practical but good looking part.
Easy to fit, sold with all fitting
s needed. 2 versions to cover bikes with & without ESAR1200GS & Adventure without ESA - £228.00
R1200GS & Adventure with ESA - £250.28
An easy to fit replacement, with a new design especially for the new 1200. This high quality part is not only an attractive replacement for the original, plain looking black plastic plug in the centre of your top yoke, it enables you to read the ambient temperature that you are riding through. This is especially useful when riding in cold weather because it can give you an idea how close you are to the freezing point and make you aware of the potential for ice on the road. To install, simply remove the plastic cap and insert this part in its place. It is held in place with an "O"-ring, and the clever design features a vent which equalizes pressure and prevents the gauge from pushing out due to temperature and elevation changes. The dial resembles the Boxer instrument design and features both Celsius and Fahrenheit scales. The back of the thermometer has a watch-like stainless steel cover. A small recess on the side aides removal. Silver anodised.
Note: The temperature reading may vary from the actual outer temperature due to its fitted position (direct sun etc).
For R 1200 GS + Adventure
- £49.25
VarioLevers
An exclusive, user friendly
and ergonomic lever revolution: We have developed a brake and clutch lever
that is both adjustable for reach and length that can be dialled in for
individual riding needs. Simply loosen the fixing screw and the lever
length can be changed. Especially for bikes with the strong power assisted
Integral ABS brake systems a shorter lever allows better feel. With
the VarioLever it is possible to brake with 2 or three fingers without
squashing the other fingers. This goes for the clutch as well.
Fully
extended, the lever is about the same length as the original and the full
braking force can be applied. An additional new feature is the easy
adjustability of the lever reach, which can easily be applied whilst
riding. This adjustment is traditionally used in racing but also important
on fast mountain riding where adjustment of the lever is required to
compensate for brake fade. Even with thick winter gloves the large
adjustment wheel can easily be turned with an outstretched index finger.
The levers are precision CNC machined out of top quality aluminium alloy
(AL 7075 T6) as preferably used in aircraft or space applications and are
therefore extremely strong. Even with a fully extended lever a force of
over 60(!) Kg can be applied without problems on the outer tip.
For new type Levers (K 1200 S + R, R 1200 GS, 1200 Adventure, 1200 ST etc.) - £78.76 each
Tornado hub cover
This part covers up the large hole of the final drive of the new generation bikes. Both ends of the hub are covered and make the whole assembly look much nicer and cleaner. The covers have a precision machined turbine-like pattern that gives it a flowing, dynamic appearance. The covers use a clever expanding O-ring clamping method, and to ensure no bolts or threads spoil the appearance on the outside, we have added a special tool that hooks into the holes for easy and safe fitting.
Covers both ends with turbine design
Improves appearance of hub
Same temperatures as original
CNC precision machined out of solid aluminium
Secure expanding O-ring clamping method
Easy to fit, includes special tool and 2 Boxer emblems
Anodised silver/titan and matches hub colour
For R 1200 GS/HPS/Adventure/RT/ST/S + K 1200 R + S - £78.76
A fully packed 1200 GS on soft ground or hot tarmac is a recipe for disaster. This part reduces the the danger. The precision machined plate is made of 8 mm thick aluminium alloy, the contours of the side stand are matched for a good fit. The surface area is increased by 100% compared to the original sidestand. Anodised black, comes with all bolts and a vibration-damping pad. Easy to fit.
R 1200 GS - £
24.60
This handle makes lifting the bike onto the centre stand much easier, especially when the bike is fully loaded. The folding mechanism allows the grippy handle to be deployed quickly, and when not in use it is tucked away neatly. The mounting position on the rear footrest tube allows the position to be adjusted depending on rider height. Made of aluminium, anodised silver. Easy to fit with only two bolts (supplied).
For R 1200 GS + Adventure - £
68.94 silver or black.
This genial little helper is a must for all riders.
It quickly mounts onto any twist grip, and reduces the load on the hand. It is easy to fit and remove (when not needed) and virtually indestructible.
On long trips the throttle hand fingers can get tired, the Throttle Rocker prevents this as now most of the pressure is passed on to the hand itself.
It is not only useful for the motorway use, sometimes the constant change of speed on twisty lanes can be tiring as well.
Even if you've got a cruise control system, the Throttle Rocker gives you an alternative, as it allows variable speeds.
For any bike - £11.50
Swingarm Pivot Covers
The big cavities of the swing arm pivot should be kept protected. The original plastic cover does not last very long, especially during off road riding. This causes the holes to get covered in dirt and the pivot starts to show signs of corrosion after a while. Our covers not only protect, they also look good and the design looks well integrated with the rest of the bike. The fixing method used for this one is innovative and elegant: A special set screw pushes an "O" ring against the inner wall of the hole and makes sure the cover cannot move. As the tolerances in this area of the frame are quite big, this is the only method that ensures a save and central fixing. The pattern on the covers is similar to the one used on our oil filler plugs and fits well with the overall design of the 1200 GS. Fitting the covers is very easy, and only a small Allen key is required to tighten the set screw.
For R 1200 GS + Adventure
£19.67 each
Telelever Cover Set
The left side cover can be used to replace the original plastic covers on both sides of the Telelever pivot points. It uses the same mounting method as the swingarm pivot set.
Telelever-Set (Lh + Rh side) £35.45